{
  "slug": "circuit-sprint",
  "title": "Circuit Sprint",
  "subject": "Science",
  "notes": "Every round shows a circuit drawn from a battery (one cell), wires and parts. Bulbs, buzzers and motors are treated as working loads unless the item says one is broken. Level 1: the player picks one of three parts for the gap in a single loop. Levels 2 and 3: the player places a switch (which is then turned off) or a short wire (a 'jumper') at one of several marked spots, or picks one of two circuits. Which choice is right is never typed in by hand: the game works out what each choice does with a circuit solver (a load works only if it lies on a complete conducting path from one end of the battery to the other; a load whose two ends are joined by a bare wire gets no current; if the battery's two ends are joined by a bare wire, no load works) and makes sure exactly one choice matches the goal. {placeholders} in an explanation are filled from the round. Bulbs are named A, B, C from the battery outward.",
  "materials": [
    {
      "id": "copper",
      "name": "copper wire",
      "conductor": true,
      "note": "metal"
    },
    {
      "id": "foil",
      "name": "aluminum foil",
      "conductor": true,
      "note": "metal"
    },
    {
      "id": "clip",
      "name": "steel paper clip",
      "conductor": true,
      "note": "metal (bare, not plastic-coated)"
    },
    {
      "id": "nail",
      "name": "iron nail",
      "conductor": true,
      "note": "metal"
    },
    {
      "id": "straw",
      "name": "plastic straw",
      "conductor": false,
      "note": "plastic"
    },
    {
      "id": "band",
      "name": "rubber band",
      "conductor": false,
      "note": "rubber"
    },
    {
      "id": "stick",
      "name": "wooden craft stick",
      "conductor": false,
      "note": "dry wood"
    },
    {
      "id": "marble",
      "name": "glass marble",
      "conductor": false,
      "note": "glass"
    },
    {
      "id": "string",
      "name": "cotton string",
      "conductor": false,
      "note": "dry cotton"
    }
  ],
  "levels": [
    {
      "id": 1,
      "name": "Light it up",
      "grades": "Grades 3–5",
      "skill": "circuits.basics",
      "note": "Current only flows around a complete loop from one end of the battery to the other. Fill the gap with the part that does what the goal says.",
      "items": [
        {
          "id": "conductor",
          "gen": "conductor",
          "rule": "loop: battery, bulb, gap. Choices: one conductor and two insulators from materials. Goal: the bulb lights. Right: the conductor",
          "explanation": "The {m} is metal, and metals are good conductors, so the loop is complete and the bulb lights. The {i1} and the {i2} are insulators: they block the current.",
          "source": "https://www.gov.uk/government/publications/national-curriculum-in-england-science-programmes-of-study/national-curriculum-in-england-science-programmes-of-study"
        },
        {
          "id": "battery",
          "gen": "battery",
          "rule": "loop: gap where the battery goes, bulb, wires. Choices: battery, a second bulb, one insulator from materials. Goal: the bulb lights. Right: the battery",
          "explanation": "A bulb only lights when something pushes current around the loop. The battery does that; wires and bulbs on their own cannot.",
          "source": "https://www.physicsclassroom.com/class/circuits/Lesson-2/Requirements-of-a-Circuit"
        },
        {
          "id": "switch-on",
          "gen": "switchon",
          "rule": "loop: battery, bulb, gap. Choices: closed switch, open switch, one insulator from materials. Goal: the bulb lights. Right: the closed switch",
          "explanation": "A closed switch joins the gap with metal, so the loop is complete and the bulb lights. An open switch leaves a gap of air, so no current flows.",
          "source": "https://www.gov.uk/government/publications/national-curriculum-in-england-science-programmes-of-study/national-curriculum-in-england-science-programmes-of-study"
        },
        {
          "id": "switch-off",
          "gen": "switchoff",
          "rule": "loop: battery, bulb, gap. Choices: open switch, closed switch, one conductor from materials. Goal: the bulb stays off. Right: the open switch",
          "explanation": "An open switch leaves a gap in the loop, so no current flows and the bulb stays off. The closed switch and the {m} would both complete the loop and light it.",
          "source": "https://www.gov.uk/government/publications/national-curriculum-in-england-science-programmes-of-study/national-curriculum-in-england-science-programmes-of-study"
        },
        {
          "id": "output",
          "gen": "output",
          "rule": "loop: battery, wires, gap. Goal: light (bulb), sound (buzzer) or motion (motor), picked at random. Choices: bulb, buzzer, motor. Right: the part for the goal",
          "explanation": "Electric current carries energy that parts turn into other forms: a bulb gives light, a buzzer gives sound and a motor gives motion. To make it {verb}, use the {part}.",
          "source": "https://www.nextgenscience.org/pe/4-ps3-2-energy"
        }
      ]
    },
    {
      "id": 2,
      "name": "Series and parallel",
      "grades": "Grades 5–7",
      "skill": "circuits.series-parallel",
      "note": "In a series circuit there is one loop. In a parallel circuit each bulb has its own branch to the battery.",
      "items": [
        {
          "id": "switch-all",
          "gen": "switchall",
          "rule": "parallel circuit with 2 or 3 bulbs on branches; spots: the main wire between the battery and the first branch, the top wire between branches (3 bulbs only), and each branch. The switch is placed, then turned off. Goal: every bulb goes off. Right: the main wire",
          "explanation": "Every branch gets its current through the main wire from the battery. A switch there opens the path for all the branches at once, so every bulb goes off.",
          "source": "https://www.physicsclassroom.com/class/circuits/Lesson-4/Parallel-Circuits"
        },
        {
          "id": "switch-one",
          "gen": "switchone",
          "rule": "parallel circuit with 2 or 3 bulbs on branches; spots: the main wire between the battery and the first branch, and each branch (no top-wire spots between branches, since for the last bulb that wire would work too). Target bulb picked at random. The switch is placed, then turned off. Goal: only the target bulb goes off. Right: the target bulb's branch",
          "explanation": "Each branch of a parallel circuit is its own path to the battery. A switch on bulb {x}'s branch opens only that path, so bulb {x} goes off and {rest}.",
          "source": "https://www.physicsclassroom.com/class/circuits/Lesson-4/Parallel-Circuits"
        },
        {
          "id": "pick-stays",
          "gen": "pickstay",
          "rule": "two circuits side by side in random order: bulbs A and B in series, and bulbs A and B in parallel. Bulb A is unscrewed in both. Goal: the circuit where bulb B stays lit. Right: the parallel circuit",
          "explanation": "In the parallel circuit bulb B has its own branch to the battery, so it stays lit. The series circuit has only one loop, and unscrewing bulb A breaks it, so bulb B goes out too.",
          "source": "https://www.physicsclassroom.com/class/circuits/Lesson-4/Two-Types-of-Connections"
        },
        {
          "id": "pick-goes",
          "gen": "pickgoes",
          "rule": "the same two circuits as pick-stays. Bulb A is unscrewed in both. Goal: the circuit where bulb B goes out. Right: the series circuit",
          "explanation": "The series circuit has only one loop, so unscrewing bulb A breaks it and bulb B goes out. In the parallel circuit bulb B has its own branch, so it stays lit.",
          "source": "https://www.physicsclassroom.com/class/circuits/Lesson-4/Two-Types-of-Connections"
        },
        {
          "id": "pick-type",
          "gen": "picktype",
          "rule": "the same two circuits as pick-stays, nothing unscrewed. Goal: the series circuit or the parallel circuit, picked at random. Right: that circuit",
          "explanation": "In a series circuit the parts are joined one after another in a single loop. In a parallel circuit each bulb sits on its own branch. So the {kind} circuit is the {side} one.",
          "source": "https://www.physicsclassroom.com/class/circuits/Lesson-4/Two-Types-of-Connections"
        }
      ]
    },
    {
      "id": 3,
      "name": "Fix it: bypasses and short circuits",
      "grades": "Grades 6–8",
      "skill": "circuits.short",
      "note": "A bare wire is an easy path: current takes it instead of going through a bulb. Use that to fix circuits, and learn what a short circuit is.",
      "items": [
        {
          "id": "bypass",
          "gen": "bypass",
          "rule": "series loop with a battery and 2 or 3 bulbs; one bulb, picked at random, is broken (its filament is snapped). Spots: a wire across each bulb. Goal: every bulb that is not broken lights. Right: the wire across the broken bulb",
          "explanation": "Bulb {x} is broken, so the single loop has a gap and nothing lights. A wire around bulb {x} gives the current a path past it, so the loop is complete and {rest}.",
          "source": "https://www.physicsclassroom.com/class/circuits/Lesson-2/Requirements-of-a-Circuit"
        },
        {
          "id": "short-one",
          "gen": "shortone",
          "rule": "series loop with a battery and 3 working bulbs; spots: a wire across each bulb and a wire across the battery; target bulb picked at random. Goal: only the target bulb goes out. Right: the wire across the target bulb",
          "explanation": "A wire across bulb {x} gives the current a path with almost no resistance, so the current takes the wire instead of bulb {x}. Bulb {x} goes out, and the others stay lit.",
          "source": "https://www.physicsclassroom.com/class/circuits/Lesson-4/Series-Circuits"
        },
        {
          "id": "short-circuit",
          "gen": "shortbat",
          "rule": "series loop with a battery and 2 working bulbs; spots: a wire across each bulb and a wire across the battery. Goal: every bulb goes out. Right: the wire across the battery",
          "explanation": "A wire straight across the battery is a short circuit: the current skips every bulb, so they all go out, and the big current makes the battery hot. Never join a battery's two ends with a bare wire.",
          "source": "https://phys.libretexts.org/Bookshelves/University_Physics/University_Physics_(OpenStax)/University_Physics_II_-_Thermodynamics_Electricity_and_Magnetism_(OpenStax)/10%3A_Direct-Current_Circuits/10.02%3A_Electromotive_Force"
        },
        {
          "id": "switch-two",
          "gen": "switchtwo",
          "rule": "parallel circuit with 3 bulbs, A nearest the battery; spots: the main wire, the top wire between A's and B's branches, the top wire between B's and C's branches, and each branch. The switch is placed, then turned off. Goal: bulbs B and C go off and A stays lit. Right: the top wire between A's and B's branches",
          "explanation": "Bulbs B and C get their current through the wire between bulb A's branch and theirs. A switch there turns off both of them, while bulb A's branch still has its own path to the battery.",
          "source": "https://www.physicsclassroom.com/class/circuits/Lesson-4/Parallel-Circuits"
        }
      ]
    }
  ]
}
